راهنمای RTU100

RTU100

به منظور فراهم آوردن حداقل امکانات کنترلی در سیستم های SCADA و همچنین در اختیار قرار دادن تعداد مناسب و کافی از I/O های دیجیتال و آنالوگ که در فضایی محدود و کوچک قابل نصب باشند ، ایده طراحی سیستم RTU100 به وجد آمد.

 ویژگی ها:

Controller:

                 Processor:    x86 (32bit)

                 Memory:        128MB DDR2 on board  Embedded Disk Module (16 M and above)

I/O:

                 Analog input:  4 inputs per module ( 0-20 mA , 4-20 mA , 0-10 Vdc  )

                 Analog output:  -

                 Digital Input :    8 input per module (9-30 Vdc)

                Digital output :   4 output per module , MechanicalRelay 

Communication:

                Serial port :        3 RS232 , 1 RS232/RS485/RS422

                Lan :                   Ethernet 10/100 Mbps

                network protocol:  IP: ARP, TCP , UDP,TFTP , ICMP

                USB :                  2 port USB

General:

                Dimention(w*h*d) : 227*180*87mm

                operating temperature : -20c to 60c

                Humidity :                 10-95% RH

                power suplly :         18-36 Vdc or 9-18 Vdc , 15 W with all relays energized